MixApplications

How do MixApplications USB apps keep your drive and your data safe?

Ultimate USB, DROFUS, Ventoy (Unofficial) and USB Tools test the drive when you connect it, refuse a drive that cannot be written, ask before anything is erased, check an image before it touches the drive, recover a lost USB connection, and test every format before they report success. Everything runs on your phone, with no PC and no root.

Last updated

The short answer

  1. Trusted for years: Ultimate USB, DROFUS, Ventoy (Unofficial) and USB Tools each have over 1,000,000 downloads on Google Play, and we have built USB apps for more than five years.
  2. Fully tested: every version is fully tested before each release, on 5+ phones from different brands (Android 10 to 16) and 15+ USB storage devices: flash drives, a USB hard disk and SD card readers, used directly and through USB hubs.
  3. Checked before writing: every drive is tested when you connect it, read-only and fake drives are caught, and nothing is erased without your OK.
  4. Protected when something goes wrong: the USB connection recovers by itself, a different drive is never written, and your tokens come back.
  5. Verified after: every format is tested before success is shown, and image writes wait until the drive confirms the data is written.
  6. Never worse than a format: nothing the apps do harms the drive's hardware; the worst case is a drive that needs formatting again.
  7. Private: everything runs on your phone, with no account, and your files are never uploaded.
1,000,000+downloads for each app
5+years of USB apps
58languages
0accounts needed

Why are our USB apps the best choice?

Because they give you everything you need for USB drives, right on your phone: bootable Windows and Linux drives, Ventoy, formatting and partitions, secure wiping, file recovery, backups, game tools and a full file manager, with no PC and no root.

Every app is tested across a wide range of phones and USB devices, so both your phone and your USB devices are protected.

We are grateful to every user who trusts us with their drives and their data.

What happens if the USB connection fails or the drive is unplugged?

Our USB apps use a very advanced USB connection. If anything goes wrong while data is being transferred, the app recovers the connection. It protects your USB devices from damage and your data from loss, and it tells you when a write did not complete instead of reporting success.

We fully test this connection in the worst cases before every release, to make sure it is the best, most stable and safest USB connection.

What does the app do in each worst case?

What happensWhat the app does
A short USB glitch, a loose contact or a hub hiccupRecovered automatically. The job carries on.
The drive disconnects: unplugged, a loose cable, a hub dropping out, or power to the port lostThe app shows Device Removed with Retry. Plug the same drive back in and tap Retry: most burns, Raw Write, backups and restores continue where they stopped.
The drive hangs but stays attachedThe app asks you to reconnect it and offers Retry.
A different drive is plugged in during a jobIt is refused. A job only writes to the drive it started on.
The drive turns read-only during a jobThe app first tries to recover it. If the drive still refuses writes, the job stops with a clear message, and the tokens of a burn come back.
The drive is unplugged during a Ventoy install, update or clearThe job stops, a failed install clears its half-written setup, and the tokens come back.
The drive is unplugged during a wipeThe wipe is saved. When the same drive is back, Continue wipe goes on from the same pass.
The drive is unplugged during a recovery scanThe scan pauses and continues when the same drive is plugged into any USB port.
The app is closed or the phone restarts during a jobThe tokens of an unfinished paid job come back at the next start. A wipe offers Continue wipe, a recovery scan offers Continue scan, and a burn is started again.
A burn is stopped by force: the app is force-closed, or the phone switches off or crashesFor every burn type, the drive is left marked to be formatted again, so a half-written drive never looks finished.
A very slow driveThe app waits and adapts to the drive. Wipe shows the estimated time before it starts.
A drive that was not closed properlyFAT, exFAT, NTFS and ext drives are checked and repaired automatically when they are opened. A drive with a hibernated Windows on it is never written.
A drive that falls back to USB 1.1 speedThe recovery scan tells you and asks you to plug the drive in again.
An empty card readerThe app tells you that there is no card or disk in the drive.
A write-protected driveIt is recognised as soon as you start a job: one clear message, and nothing is charged.
A drive that may be fakeThe app asks whether to Scan for real size or Continue anyway. After a scan, every tool works inside the real size; if you keep the claimed size, every write warns you once before anything is written. A drive that did not keep its test data opens read-only.

Every version is fully tested before each release, on 5+ phones from different brands (Android 10 to 16) and 15+ USB storage devices: flash drives, a USB hard disk and SD card readers, used directly and through USB hubs.

What does the app check before it writes anything?

How is the drive protected while a job runs?

Does the app check the result before it reports success?

Do I lose tokens when a job fails?

No. The app shows the token cost before a job starts. If the job fails, is cancelled, or the drive is removed, the tokens come back automatically (in Partition Wizard, for the steps that did not finish). If the app is closed during a job, they are returned the next time the app starts.

Are my files uploaded anywhere?

No. Your files and images are processed on your phone and are never uploaded, and there is no account or sign-up.

Is every release tested before it reaches me?

Yes. Every version is fully tested before each release, on 5+ phones from different brands (Android 10 to 16) and 15+ USB storage devices: flash drives, a USB hard disk and SD card readers, used directly and through USB hubs. Each drive runs about 40 user scenarios, 20 fault cases and a stress test, and more than 4,000 automated tests run before each release. The worst cases tested:

Each tool has its own page with every step and option: start from Format USB, ISO Burner, Ventoy or Wipe USB, or read how to choose a bootable USB app.

Available in these apps

Still stuck? Ask us by WhatsApp or email.