How do I check my USB drive for bad blocks or fake capacity?
Open Bad Blocks Check in Ultimate USB or USB Tools, choose 1 or 2 passes and tap START. It finds failing sectors and fake-capacity drives, and uses no tokens. It erases all data on the drive.
Last updated
How do I check a drive for bad blocks step by step?
- Copy any files you want to keep off the drive. The check destroys all data on it.
- Connect the drive to your phone with a USB OTG adapter and open Ultimate USB or USB Tools.
- Open the Diagnostics & Info group and tap Bad Blocks Check.
- Number of Passes: choose 1 Pass or 2 Passes.
- Keep Detect fake / counterfeit capacity ticked to test the real size of the drive.
- Tap START. The app warns that all data will be destroyed. Confirm to start.
Keep the app in the foreground while the check runs: operations pause when the app is minimized, to protect the drive.
A drive that is write-protected or does not take writes is refused before the app asks you anything.
Which options can I set, and what are the defaults?
| Option | Values | Default |
|---|---|---|
| Number of Passes | 1 Pass, 2 Passes | 1 Pass |
| Detect fake / counterfeit capacity | On, off | On |
What does Bad Blocks Check find?
- Failing sectors: places on the drive that do not keep data correctly are reported as bad blocks.
- Fake-capacity drives: a counterfeit USB drive or SD card reports a large capacity but silently discards anything past its real size. The check exposes this.
When you connect a drive that may be fake, the app also asks whether to Scan for real size or Continue anyway.
What do I do if the check finds errors?
Replace the drive. Physical flash failure cannot be repaired by any software.
Does Bad Blocks Check use tokens?
No. Bad Blocks Check is free. The app only asks you to confirm before it starts.
To measure the drive's speed without erasing it, use Benchmark with Read Only.